$TXT Created by  at DEVESS.FO-ALBANY.DOMAIN.EXT  (KIDS) on Tuesday, 02/25/14 at 13:12
=============================================================================
Run Date: FEB 25, 2014                     Designation: IB*2*461
Package : IB - INTEGRATED BILLING             Priority: Mandatory
Version : 2                                     Status: Under Development
=============================================================================

Associated patches: (u)LEX*2*80    <<= must be installed BEFORE `IB*2*461'
                    (v)IB*2*458    <<= must be installed BEFORE `IB*2*461'
                    (u)ICD*18*57   <<= must be installed BEFORE `IB*2*461'
                    (u)ICD*18*64   <<= must be installed BEFORE `IB*2*461'
                    (v)IB*2*494    <<= must be installed BEFORE `IB*2*461'

Subject: IB ICD-10 CLASS 1 REMEDIATION

Category: 
  - Routine
  - Data Dictionary
  - Input Template
  - Enhancement (Mandatory)
  - Other

Description:
============

 The International Classification of Diseases, Tenth Revision (ICD-10) 
 Class 1 Software Remediation project replaces the 30-year-old set of 
 diagnosis and procedure codes (ICD-9-CM) that medical personnel use. 
 Dates of service or dates of discharge for inpatients, that occur on or 
 after the implementation date, will use the ICD-10 code set. Clinical 
 Modification (ICD-10-CM) diagnosis codes increase from about 13,000 ICD-9 
 codes to more than 68,000. Procedure Coding System (ICD-10-PCS) procedure 
 codes increase from about 3,800 ICD-9 codes to nearly 87,000. Both 
 systems also expand the number of characters allotted to seven 
 alpha-numeric characters. This value does not include the decimal point, 
 which follows the third character for the ICD-10-CM code set. There is no 
 decimal point in the ICD-10-PCS code set. 
  
 These code sets have the potential to reveal more about quality of care, 
 so that data can be used in a more meaningful way to better understand 
 complications, better design clinically robust algorithms, and better 
 track the outcomes of care. ICD-10-CM also incorporates greater 
 specificity and clinical detail to provide information for clinical 
 decision making and outcomes research.
  
  
 This patch updates Integrated Billing (IB) to accommodate ICD-10 code 
 versions when activated.  The following modifications are required for 
 Integrated Billing (IB) to be compliant.   In all the following cases 
 when a date is concerned it is relative to the ICD-10 Activation Date.
                  
 Bill Inpatient Timeframe
 ------------------------
 An inpatient bill will be allowed to span the ICD-10 activation date. The 
 Statement To Date will determine if the bill is within the ICD-9 or ICD-10 
 timeframe.
                  
 Bill Outpatient Timeframe
 -------------------------
 An Outpatient bill may not span the ICD-10 Activation Date.  
                  
 -  When creating an Outpatient bill and the Statement From Date entered is 
    before the ICD-10 activation date the default for the Statement To Date 
    will be one day before the activation date.
                  
 -  When creating an Outpatient bill and the Statement From Date entered is 
    before the ICD-10 activation date a Statement To Date after the 
    activation date will not be allowed.
                  
 -  When editing Outpatient bill dates on Screen 7 the Statement To Date 
    and Statement From Date will not be allowed to span the ICD-10 
    activation date.
                  
 -  An additional edit check error has been added if the Statement To Date 
    and Statement From Date span the ICD-10 activation date.
                  
 Bill Enter/Edit of Diagnosis and Procedures
 -------------------------------------------
 The look up and selection of ICD Diagnosis and Procedures has been updated 
 to accommodate the two ICD coding versions: ICD-9 and ICD-10.
                  
 For Diagnosis codes the Statement To Date or end date of the bill will 
 determine which set of codes are available on the bill.  Bills with a 
 Statement To Date less than the ICD-10 activation date will allow ICD-9 
 Diagnosis codes.  Bills with a Statement To Date on or after the ICD-10 
 activation date will allow ICD-10 Diagnosis codes.
                  
 For Procedures the Procedure Date entered will determine which set of 
 codes available for selection, ICD-9 or ICD-10.
                  
 When certain Diagnosis are displayed for selection on a bill the inactive 
 codes are displayed but not allowed to be placed on the bill.  In these 
 cases only the inactive codes of the coding version applicable to the bill 
 will be displayed.
                  
 -  Bill Diagnosis on Screen 4 for Inpatient and Screen 5 for Outpatient.
 -  Patient Reason for Visit on Screen 10 for Outpatient UB04.
                  
 The short name or description of both Diagnosis and Procedures has been 
 extended from 30 characters to 60 characters in ICD-10.  The display of 
 these names has been lengthened to the extent available on the screens.
                  
 External Cause of Injury codes ICD-9 began with E as the first character.
 External Cause of Injury codes ICD-10 begin with V, W, X, or Y.
 -  Entry of External Cause of Injury (E) codes is limited to 3 in ICD-9.  
 -  There is no restriction on the number of codes in ICD-10 for either  
    E codes or the V, W, X or Y External Cause of Injury codes.
                  
 Bill Charge DRG Calculation
 ---------------------------
 The calculation of the DRG used for charges on Inpatient Institutional 
 bills has been updated. This DRG is based on the Movement data in PTF and 
 is displayed under each movement Diagnosis on the Screen 4 PTF Diagnosis.
                  
 -  The Present on Admission (POA) indicator assigned to a Diagnosis in PTF 
    will be included in the calculation.
                  
 -  The DRG calculation will be based on the coding version of the
    Diagnosis assigned to the movement.  Inpatient bills that span the 
    ICD-10 activation date may have ICD-10 codes assigned for movements 
    before the ICD-10 activation.  In this case the DRG calculation will be 
    based on ICD-10 although the movement date is within the ICD-9 
    timeframe.
                  
 Bill Procedure Coding Method
 ----------------------------
 The BILL/CLAIMS PROCEDURE CODING METHOD (#399,.09) has been modified from 
 ICD-9-CM to ICD. This change affects both the field and the display on 
 Screen 4 and Screen 5 of Enter/Edit Billing Information.
                  
 Bill Edit Checks
 ----------------
 Several Bill Edit Checks have been modified or added primarily due to 
 changes in the definitions of ICD-10 Diagnosis.  Several of these coding 
 rules being checked are based on a type of diagnosis that is defined by 
 the first character of the code.  With the transition to ICD-10 the 
 character identifying the type has changed in some cases.  For example the 
 External Cause of Injury codes.  
                  
 ICD-9 External Cause of Injury codes began with E as the first character.  
 ICD-10 External Cause of Injury codes begin with V, W, X, or Y.  
                  
 The result is the following updates to the Bill Edit Checks differentiated 
 by the code version:
                  
 -  Principle Diagnosis cannot begin with an E code for ICD-9
 -  Principle Diagnosis cannot begin with a V, W, X, or Y code for ICD-10
                  
 -  Principle Diagnosis begins with a V code warning for ICD-9
 -  Principle Diagnosis begins with a Z code warning for ICD-10
                  
 -  More than 3 E codes on a bill warning for ICD-9
    Note there is no corresponding limit on the number of V, W, X or Y 
    codes in ICD-10
                  
 -  Pregnancy Diagnosis on the bill with no corresponding Occurrence Code 
    10 Last Menstrual Period error, the determination of Pregnancy code 
    is updated for code version:
    Diagnosis in ICD-9:  V22*-V24*, V27*-V28*, 630*-677
    Diagnosis in ICD-10:  O00.*-O9A.*, Z34.*-Z36.*, Z37.*-Z39.*, Z3A.*
                  
 -  An Outpatient bill's Statement Dates cannot span the ICD-10 activation.
    There is no corresponding limit on Inpatient bills.  Inpatient bills 
    may span the ICD-10 activation date.
                  
 Default Prescription Diagnosis Site Parameter
 ---------------------------------------------
 A site parameter exists to provide a Default Diagnosis that is 
 automatically added to a bill when a Prescription is added to the bill.  
 This capability is updated to accommodate both an ICD-9 and ICD-10 
 Diagnosis.
                  
 -  The existing IB SITE PARAMETERS, DEFAULT RX REFILL DX (#350.9, 1.29) 
    will remain available for ICD-9 version Diagnosis.  
 -  A new IB SITE PARAMETERS field DEFAULT RX REFILL DX ICD-10 
    (#350.9, 7.05) is created for the ICD-10 version of the Diagnosis.
    When this patch is installed this new field will be set to a default 
    value of Z76.0 - Encounter for issue of repeat prescription
                  
 One of the two Default Rx Diagnosis will be viewable and editable in the 
 MCCR Site Parameter Display/Edit option based on the date.
                  
 When editing a bill in Enter/Edit Billing Information the Default 
 Diagnosis automatically added to a bill when a prescription is added will 
 be determined based on the bill Statement To Date.  The ICD-10 Default 
 Diagnosis will be automatically added to bills with a Statement To Date on 
 or after the ICD-10 Activation date.
                  
 EDI Extract
 -----------
 The EDI Extract of a claim has been updated to be ICD-10 compliant.
 The Diagnosis and Procedure Qualifiers that identify the codes on the EDI 
 extracts have been updated to distinguish between ICD-9 and ICD-10 codes.  
 Note the External Cause of Injury Diagnosis codes are uniquely identified 
 on the UB04 form.  The following are the types of diagnosis and procedures 
 extracted and their corresponding Qualifier.
                  
 -  DC1-Principle Diagnosis (not External Cause of Injury) ICD-9 is BK
 -  DC1-Principle Diagnosis (not External Cause of Injury) ICD-10 is ABK
                  
 -  DC1-Diagnosis (not Principle/External Cause of Injury-UB) ICD-9 is BF
 -  DC1-Diagnosis (not Principle/External Cause of Injury-UB) ICD-10 is ABF
                  
 -  DC1-Diagnosis External Cause of Injury (E) on UB04 ICD-9 is BN
 -  DC1-Diagnosis External Cause of Injury (V,X,W,Y) on UB04 ICD-10 ABN
                  
 -  DC1-Diagnosis External Cause of Injury (E) on CMS ICD-9 is BF
 -  DC1-Diagnosis External Cause of Injury (V,X,W,Y) on CMS ICD-10 is ABF
                  
 -  PC1-Principle Procedure ICD-9 is BR
 -  PC1-Principle Procedure ICD-10 is BBR
                  
 -  PC1-Procedure (not Principle) ICD-9 is BQ
 -  PC1-Procedure (not Principle) ICD-10 is BBQ
                  
 -  CLIA-Admitting Diagnosis (Inpatient) ICD-9 is BJ
 -  CL1A-Admitting Diagnosis (Inpatient) ICD-10 is ABJ
                  
 -  CL1A-Patient Reason for Visit (UB04 - Outpatient) ICD-9 is PR
 -  CL1A-Patient Reason for Visit (UB04 - Outpatient) ICD-10 is APR
                  
 Third Party Joint Inquiry
 -------------------------
 The Bill Procedure Screen has been update to display more of the bill ICD 
 Procedure description and an indicator of procedure's coding system.
                  
 Claims Tracking
 ---------------
 The primary updates required for Claims Tracking were to displays and the 
 addition of the Present On Admission indicator.
                  
 -  The CLAIMS TRACKING, ADMITTING REASON (ICD) (#356, .3) name was changed 
    to the more generic, ICD from ICD-9.
                  
 The Inpatient Diagnosis and Procedures and DRG calculation have been 
 updated for ICD-10.  The Diagnosis Update (DU) and Procedure Update (PU) 
 actions available to enter codes to calculate an DRG for Inpatient stays:
                  
 -  The Inpatient Diagnosis selection display of inactive codes will be 
    limited to the coding version applicable to the admission date of 
    the stay.
                  
 -  An new INPATIENT DIAGNOSIS, POA INDICATOR (#356.9, .05) has been added 
    with the following selections to indicate if the diagnosis related 
    condition was present when the patient was admitted:
    Y = Present at the time of inpatient admission
    N = Not present at the time of inpatient admission 
    U = Documentation is insufficient to determine if condition was present 
    W = Provider is unable to clinically determine if condition was present
    This POA indicator will default to Yes when a Diagnosis is entered.
                  
 -  Within the Update actions the list of Diagnosis (DU) has been updated 
    to display the code version and the POA indicator.
                  
 -  Within the Update actions the list of Procedure (PU) has been updated 
    to display the code version.
                  
 -  The DRG calculation has been updated to include the new POA Indicator.
                  
                  
 Technical Description:
 ======================
                  
 In Claims Tracking two API's that get Outpatient encounter data had been 
 retired but were still being used:  SDCO3 (#403) and SDCO4 (#404).  These 
 two API's have been replaced by the supported API SDOE (#2546).  Expanded 
 Claims Tracking Screen and Inquire to Claims Tracking report. This update 
 results in no functional change.
                  
 ICD API (#3990) ICDCODE previously used to get ICD Diagnosis and Procedure 
 data is being retired and replaced by the new ICD API (#5747) ICDEX.
 All instances in IB of the use of ICDCODE have been replaced by ICDEX.
                  
 Throughout IB the functions in the utility IBACSV are used to get the data 
 on the various codes, including ICD Diagnosis and Procedures.  Therefore 
 many of the changes necessary for conversion to ICD-10 were accomplished 
 by updating the API calls in this utility.
                  
 The IB ERROR (#350.8) codes have been updated in the post-init:
 -  The existing IB NO DX Error code (IB071) message has been updated, ICD9 
    has been replaced with ICD: A claim must contain an ICD diagnosis.
 -  A new IB354 Error Code has been added: Statement Covers To date cannot 
    span into ICD-10 effective period.
 -  A new IB355 Error Code has been added: The Principal (first-entered) 
    diagnosis cannot begin with a V, W, X or Y.
                  
 The following IB FORM FIELD CONTENT (#364.7) entry's Format Code (.1) have 
 been modified.  These entries are deleted in the pre-init and re-added 
 during the install to ensure an accurate update.
                  
 Inpatient UB Form
 -  Entry #40 - PC1:  Procedure Code Qualifiers - BR/BQ
 -  Entry #1635 - CL1A-15:  Admitting Diagnosis - BJ/ABJ
                  
 Outpatient UB Form
 -  Entry #1617 - CL1A-17:  Patient Reason for Visit (1) Qualifier - PR/APR
 -  Entry #1619 - CL1A-19:  Patient Reason for Visit (2) Qualifier - PR/APR
 -  Entry #1620 - CL1A-20:  Patient Reason for Visit (2) Diagnosis
 -  Entry #1621 - CL1A-21:  Patient Reason for Visit (3) Qualifier - PR/APR
 -  Entry #1622 - CL1A-22:  Patient Reason for Visit (3) Diagnosis
                  
 Note the Bill Diagnosis Qualifiers have also changed however the related 
 Form Field entry #41 - DC1 Diagnosis Code calls a procedure to determine 
 the Diagnosis Qualifiers.  This procedure (ID1^IBCEF2) has been updated so 
 entry #41 does not need to be exported.
                  
 Two Input Templates are re-compiled in the post-init.  The templates did 
 not change but a field edited within templates did change:  BILL/CLAIMS 
 PROCEDURE CODING METHOD (#399,.09).  Therefore the templates are not 
 exported but re-compiled:
 -  IB SCREEN4 - Enter/Edit of Inpatient Billing information
 -  IB SCREEN5 - Enter/Edit of Outpatient Billing Information
                  
 The following options have been updated with this patch:
 -  Third Party Joint Inquiry [IBJ THIRD PARTY JOINT INQUIRY]
 -  Enter/Edit Billing Information [IB EDIT BILLING INFO]
 -  MCCR Site Parameter Display/Edit [IBJ MCCR SITE PARAMETERS] 
 -  Claims Tracking Edit [IBT EDIT TRACKING ENTRY]
 -  Inquire to Claims Tracking [IBT OUTPUT CLAIM INQUIRY]
                  
                  
 Patch Components:
 =================
                  
 Files & Fields Associated:
                  
 File Name (Number)            Field Name (Number)                Change
 ------------------            -------------------                ---------
 IB SITE PARAMETERS (#350.9)   DEFAULT RX REFILL DX ICD-10 (7.05)  New
 CLAIMS TRACKING (#356)        ADMITTING REASON (ICD) (.3)         Modified
 INPATIENT DIAGNOSIS (#356.9)  POA INDICATOR (.05)                 New
 BILL/CLAIMS (#399)            PROCEDURE  CODING METHOD (.09)      Modified
                  
 Forms Associated:  NA
 Mail Groups Associated:  NA
 Options Associated:  NA - None Exported
 Protocols Associated:  NA
 Security Keys Associated:  NA
 Templates Associated:  NA - None Exported
 Patient Safety Issues (PSIs):  NA
 Remedy Ticket(s) & Overview:  NA
                  
 New Service Requests (NSRs):
 ----------------------------  
 NSR 20070902, ICD-10-CM Conversion
                  
 Documentation Retrieval Instructions:
 ------------------------------------- 
 Updated documentation describing the new functionality introduced by this 
 patch is available.
                  
 The preferred method is to FTP the files from ftp://download.vista.domain.ext/
                  
 This transmits the files from the first available FTP server. Sites may 
 also elect to retrieve software directly from a specific server as follows:
                  
  Albany         ftp.fo-albany.domain.ext  <ftp://ftp.fo-albany.domain.ext>
  Hines          ftp.fo-hines.domain.ext   <ftp://ftp.fo-hines.domain.ext>
  Salt Lake City ftp.fo-slc.domain.ext     <ftp://ftp.fo-slc.domain.ext>
                  
 Documentation can also be found on the VA Software Documentation Library 
 at:  http://www4.domain.ext/vdl/
                  
 Title                         File Name                       FTP Mode
 -----------------------------------------------------------------------
 IB v2.0 User Manual           ib_20_u.pdf                     Binary
 IB v2.0 Technical Manual      ib_2_0_p447_tm.pdf              Binary
 IB*2*461 Release Notes        ICD-10_RN_IB_2_461.pdf          Binary
                  
                  
 Patch Installation:
 ==================
                  
 Pre-Installation Overview:
 --------------------------
 The Pre-init (IBY461PR) will complete the following:
                  
 -  Deletes the entries in the IB FORM FIELD CONTENT (#364.7) file updated 
    with this patch.  These entries are re-added by the installation: 
    Entry #:  40, 1617, 1619, 1620, 1621, 1622, 1635
                  
 Post-Installation Overview:
 -------------------------------
 The Post-init (IBY461PO) will complete the following:
                  
 -  Set value of the new IB SITE PARAMETERS, DEFAULT RX REFILL DX ICD-10 
    (#350.9,7.05) to Z76.0 Encounter for issue of repeat prescription.
 -  Recompile two Input Templates.  The templates did not change so they 
    are not exported but one of the fields edited in the templates did 
    change:  IB SCREEN4 and IB SCREEN5.
 -  Update one entry in the IB ERROR (#350.8):  IB NO DX Error code (IB071)
 -  Add two new IB ERROR (#350.8) codes: IB354 and IB355
                  
                  
 Installation Instructions:
 --------------------------
 This patch should be installed during non-peak hours when no Integrated 
 Billing users are on the system to minimize potential disruption to users.  
 Make sure that when installing the patch the IB nightly job (IB MT NIGHT 
 COMP) is not running.  This patch should take less than 5 minutes to 
 install.
                  
                  
 1.  Choose the PackMan message containing this patch.
                  
 2.  Choose the INSTALL/CHECK MESSAGE PackMan option.  
                  
 3.  From the Kernel Installation and Distribution System Menu, select
     the Installation Menu.  From this menu, you may elect to use the
     following options. When prompted for the INSTALL NAME enter the 
     patch #: IB*2.0*461
                  
     a.  Backup a Transport Global - This option will create a backup
         message of any routines exported with this patch. It will not
         backup any other changes such as DDs or templates.
                  
     b.  Compare Transport Global to Current System - This option will
         allow you to view all changes that will be made when this patch
         is installed.  It compares all components of this patch
         (routines, DDs, templates, etc.).
                  
     c.  Verify Checksums in Transport Global - This option will allow
         you to ensure the integrity of the routines that are in the
         transport global.
                  
 4.  From the Installation Menu, select the Install Package(s) option and
     choose the patch to install.  Enter IB*2.0*461.
                  
 5.  When prompted 'Want KIDS to Rebuild Menu Trees Upon Completion of
     Install? NO//'     respond NO.
                  
 6.  When prompted 'Want KIDS to INHIBIT LOGONs during the install?
     NO//'    respond NO.
                  
 7.  When prompted 'Want to DISABLE Scheduled Options, Menu Options, 
     and Protocols? NO//    respond YES
                               
 8.  Enter options you wish to mark as 'Out Of Order': enter the following
                               
      Third Party Joint Inquiry        [IBJ THIRD PARTY JOINT INQUIRY]
      Enter/Edit Billing Information   [IB EDIT BILLING INFO]
      MCCR Site Parameter Display/Edit [IBJ MCCR SITE PARAMETERS] 
      Claims Tracking Edit             [IBT EDIT TRACKING ENTRY]
      Inquire to Claims Tracking       [IBT OUTPUT CLAIM INQUIRY]
                  
 9.  If prompted 'Delay Install (Minutes):  (0 - 60): 0//' respond 0.
                  
 10. You may delete the pre and post init routines after the 
     installation:  IBY461PR, IBY461PO.
                  
                  
 Post-Installation Instructions:
 -------------------------------
 There are no Post-installation actions required by this patch.
                  

Routine Information:
====================
The second line of each of these routines now looks like:
 ;;2.0;INTEGRATED BILLING;**[Patch List]**;21-MAR-94;Build 54

The checksums below are new checksums, and
 can be checked with CHECK1^XTSUMBLD.

Routine Name: IBACSV
    Before: B17068380   After: B24600255  **210,266,461**
Routine Name: IBCA
    Before: B24308332   After: B24815247  **43,80,109,106,137,312,461**
Routine Name: IBCBB
    Before: B73668257   After: B75240579  **80,51,137,288,327,361,371,
                                           377,400,432,461**
Routine Name: IBCBB2
    Before: B51205466   After: B54512361  **51,137,210,245,232,296,320,
                                           349,371,403,432,447,473,461**
Routine Name: IBCBB21
    Before: B14595417   After: B16839261  **51,137,210,232,155,291,348,
                                           349,403,400,432,447,461**
Routine Name: IBCEF2
    Before: B64226101   After: B68633200  **52,85,51,137,232,155,296,349,
                                           403,400,432,461**
Routine Name: IBCRBG
    Before: B58097586   After: B66274558  **52,80,106,51,142,050,010,045,
                                           382,389,461**
Routine Name: IBCSC102
    Before: B41181952   After: B41297495  **432,447,461**
Routine Name: IBCSC10B
    Before: B42359591   After: B44148706  **432,461**
Routine Name: IBCSC4
    Before: B25396440   After: B25534082  **52,51,210,245,155,287,349,
                                           403,400,461**
Routine Name: IBCSC4D
    Before: B60745629   After: B61931126  **55,62,91,106,124,51,210,403,
                                           400,461**
Routine Name: IBCSC5
    Before: B17112329   After: B17240137  **52,125,51,210,266,288,287,
                                           309,389,447,461**
Routine Name: IBCSC5C
    Before: B51873840   After: B52563078  **27,52,130,51,160,260,309,315,
                                           339,347,363,381,405,432,461**
Routine Name: IBCSCH1
    Before: B35678936   After: B35679785  **106,125,51,245,266,395,458,461**
Routine Name: IBCU4
    Before: B20382256   After: B24388158  **109,122,137,245,349,371,399,461**
Routine Name: IBCU7
    Before: B81426431   After: B82484473  **62,52,106,125,51,137,210,245,
                                           228,260,348,371,432,447,461**
Routine Name: IBCU72
    Before: B16100008   After: B16208907  **62,210,473,461**
Routine Name: IBJPS
    Before:  B3719053   After:  B3981041  **39,52,70,115,143,51,137,161,
                                           155,320,348,349,377,384,400,
                                           432,494,461**
Routine Name: IBJPS2
    Before: B40350434   After: B41765087  **39,52,115,143,51,137,161,155,
                                           320,348,349,377,384,400,432,
                                           494,461**
Routine Name: IBJTBC
    Before: B13013403   After: B15193753  **39,80,51,137,210,349,461**
Routine Name: IBTOBI4
    Before: B21631408   After: B21974181  **91,125,51,210,266,389,461**
Routine Name: IBTRE3
    Before: B26529518   After: B29082624  **10,60,210,266,461**
Routine Name: IBTRE4
    Before: B28379338   After: B28830584  **10,210,266,461**
Routine Name: IBTRE6
    Before: B15005544   After: B22956072  **210,461**
Routine Name: IBTRED0
    Before: B23670458   After: B23857712  **160,210,317,276,458,461**
Routine Name: IBTRV2
    Before: B22166861   After: B23704540  **60,210,266,461**
Routine Name: IBY461PO
    Before:       n/a   After: B10547198  **461**
Routine Name: IBY461PR
    Before:       n/a   After:  B1919798  **461**
 
Routine list of preceding patches: 312, 399, 458, 473, 494

=============================================================================
User Information:
Entered By  : DELLINGER,BARRY L             Date Entered  : AUG 23, 2011
Completed By:                               Date Completed: 
Released By :                               Date Released : 
=============================================================================


Packman Mail Message:
=====================

$END TXT
